Gran Fondo Service

The Gran Fondo (Full Tune Up Level)

Price includes labor only. Any parts required will incur additional costs. Additional labor to install parts may be required. 

Customer will be notified prior to performing any services of any additonal costs not included in the original quote.

Any items in red text are additional included services in comparison to The Sunday Club.

Frame

  • Inspect for damage
  • Check all bolts for proper torque
  • Fully clean and polish

Wheel

  • Front Wheel
    • Remove tire
    • Full wheel cleaning including rim, spokes, and hub
    • Adjust front hub bearings as needed
    • True wheel (dish, round, lateral, tension)
    • Install tire with logos centered over valve, inflate to correct pressure (new sealant if applicable)
  • ● Rear Wheel
    • Remove tire
    • Full wheel cleaning including rim, spokes, and hub
    • Adjust rear hub bearings as needed
    • True wheel (dish, round, lateral, tension)
    • Check cassette for proper torque
    • Install tire with logos centered over valve, inflate to correct pressure (new sealant if applicable)

Cranks / Bottom Bracket

  • Remove cranks, thorough cleaning in parts washer
  • Adjust bottom bracket
  • Check chainring(s) for proper torque
  • Check crank bolt for proper torque
  • Check pedals for proper torque

Headset

  • Adjust headset as needed
  • Check stem pinch bolts for proper torque

Rim Brakes

  • Front
    • Clean calipers in parts washer
    • Clean brake levers
    • Replace and lubricate cable and housing
    • Adjust pads for proper placement
    • Reset barrel adjuster and set cable tension
  • Rear
    • Clean calipers in parts washer
    • Clean brake levers
    • Replace and lubricate cable and housing
    • Adjust pads for proper placement
    • Reset barrel adjuster and set cable tension

Disc Brakes

  • Front
    • Remove pads
    • Clean calipers
    • Clean brake levers
    • Remove and clean rotor, re-install and torque bolts to spec
    • Replace and lubricate cable and housing if mechanical disc brakes
    • Top bleed brake (bleeding from brake lever)
    • Align caliper, check that pistons are functioning correctly
    • Inspect and replace pads as required (additional cost for pads)
  • Rear
    • Remove pads
    • Clean calipers
    • Clean brake levers
    • Remove and clean rotor, re-install and torque bolts to spec
    • Replace and lubricate cable and housing if mechanical disc brakes
    • Top bleed brake (bleeding from brake lever)
    • Align caliper, check that pistons are functioning correctly
    • Inspect and replace pads as required (additional cost for pads)

Derailleurs / Shifters

  • Front
    • Remove derailleur, thorough cleaning in parts washer
    • Lubricate all pivots
    • Clean and lubricate shifter
    • Replace and lubricate cable and housing
    • Align for proper position
    • Check/Set limit screws as needed for proper shifting
    • Reset barrel adjuster and set cable tension
  • Rear
    • Remove derailleur, thorough cleaning in parts washer
    • Lubricate all pivots
    • Clean and lubricate shifter
    • Replace and lubricate cable and housing
    • Check/align derailleur hanger as needed
    • Check/Set limit screws for proper shifting
    • Set B tension
    • Reset barrel adjuster and set cable tension

Chain / Cassette

  • Remove chain and clean in parts washer
  • Remove cassette and clean in parts washer
  • Inspect for wear
  • Inspect chain for proper length
  • Lubricate

Cockpit

  • Handlebars
    • Clean and polish
    • Check stem faceplate bolts for proper torque
    • Check brake levers and shifter bolts for proper torque
    • Check handlebar tape for wear, install new tape if necessary (cost of tape additional)
  • Seat Post
    • Check saddle mounting bolts for proper torque

Subscribe